Page 1 of 1
hihat input problem
Posted:
Thu Sep 11, 2014 1:18 pmby sly1974
Atmega644. After last update firmware megadrum_20140809 hihat not work properly. As input 2 no sound (only full open sound), but as 4,6,8... etc. sound work, but other pad depending on the choose input work as hihat.
Sorry my english.
Re: hihat input problem
Posted:
Thu Sep 11, 2014 3:55 pmby dmitri
Did you check BowSO/EdgeSO/BellSO, BowHO/EdgeHO/BellHO, BowSCL/EdgeSCL/BellSCL and BowCL/EdgeCL/BellCL un Pedal settings?
Re: hihat input problem
Posted:
Fri Sep 12, 2014 6:49 amby sly1974
Works. I load the settings from the previous firmware, in which everything worked properly, but it seems that I have to do some settings again.