A 2 rows connector is like this :
2 - 4 - 6 - 8......
1 - 3 - 5 - 7......
The schematic is a schematic ...
32 input connector to DIY stereo-jack w/out PCB
13 posts
• Page 2 of 2 • 1, 2
Re: 32 input connector to DIY stereo-jack w/out PCB
by Synthex » Thu Feb 26, 2009 4:39 pm
There is no mistake !
A 2 rows connector is like this :
2 - 4 - 6 - 8......
1 - 3 - 5 - 7......
The schematic is a schematic ...
A 2 rows connector is like this :
2 - 4 - 6 - 8......
1 - 3 - 5 - 7......
The schematic is a schematic ...
- Synthex
- Posts: 1471
- Joined: Fri Oct 12, 2007 6:06 am
- Location: France
Re: 32 input connector to DIY stereo-jack w/out PCB
by ole_hansen » Thu Feb 26, 2009 5:34 pm
oh ok. i just wanted to make you aware if it was a fault 
which it isn't.
the schematic is a schematic ofcourse
it just looks like the 32 row input connectors.
but there we have it - it's JUST a schematic.
follow the pinout on page 2 (quick manual v2) top left, instead!
which it isn't.the schematic is a schematic ofcourse
it just looks like the 32 row input connectors.
but there we have it - it's JUST a schematic.
follow the pinout on page 2 (quick manual v2) top left, instead!
- ole_hansen
- Posts: 126
- Joined: Thu Dec 11, 2008 9:24 pm
Re: 32 input connector to DIY stereo-jack w/out PCB
by jman 31 » Thu Feb 26, 2009 7:21 pm
Synthex wrote:jman 31 wrote:Are there schematics for these inputs? or is that something you get when you buy the kit? I did a little plundering around and I couldn't seem to find any.
All is in the PDF file "Quick Manual v2" on the main "v2.8 All In One Kit" topic.
Gotcha, I guess i missed that one. Thanks for the reply! Sorry Ole_Hansen, I didn't mean to hijack your thread.
- jman 31
- Posts: 536
- Joined: Thu Jul 10, 2008 10:51 pm
- Location: USA
13 posts
• Page 2 of 2 • 1, 2
Who is online
Users browsing this forum: Bing [Bot] and 70 guests